|The installations of connector and cable in different scenarios|
There three ways to connect the cables with the connectors: welding, plugging,and crimping. There 2 factors to judge three ways:fast or slow. usually, the fast way comes with the easy damage, while the slow way is more stable.
This way is the most stable by welding the conductors of cable and connector together, and with this reason, it is universally used in the equipment and power system.
This way is fastest by plug the conductors of cable into the connectors. Usually it is applicable to outdoors that needs fast installation and frequently replaced.
This way is more reliable than the plugging by screw up the insert-cable, usually it is applicable to outdoors, where has more strict requirement in the circuit.
The next article ： The Structure Design of LP-20